Group 5000
SM 5-235 D014/D015/D078/D079
Service
Tables
5907 Plug & Play Maker/Model Name
Selects the brand name and the production name for Windows Plug & Play. This
information is stored in the NVRAM. If the NVRAM is defective, these names
should be registered again.
After selecting, press the "Original Type" key and "#" key at the same time. When
the setting is completed, the beeper sounds five times.
5913 Switchover Permission Time
2
Print Application Timer
Sets the length of time to elapse before allowing another application to take
control of the display when the application currently controlling the display is not
operating because a key has not been pressed.
[3 to 30/1 s]
102 Print Application Set No information is available at this time. [0 to 1/1/1]
5959 Paper Size
Tray 1 (tandem tray) and the LCT do not have automatic paper size detection.
Use these SP codes to set the paper size for Tray 1 and the optional LCT.
1
Tray 1
The following paper sizes can be set. If the A3 DLT kit is not installed, you can
only use settings 0 and 1
0: A4 6: 8.5 x 14 SEF
1: 8.5 x 11 7: 8.5 x 11 SEF
2: A3 SEF 8: B5
3: B4 SEF 9: B5 SEF
4: A4 SEF 10: Custom
5: 11 x 17
Rev. 11/12/2009
To Next Page
