Group 6000
D014/D015/D078/D079 5-250 SM
6111 Booklet Fold Repeat 2000-Sheet Finisher D373
This SP sets the number of times the folding rollers are driven forward and
reverse to sharpen the crease of a folded booket before it exits the folding unit.
When set at the default (0):
The folding blade pushes the center of the stack into the nip of the folding
roller.
The folding rollers rotated ccw to crease the booklet, reverse cw, then rotate
ccw again crease the booklet fold twice before feeding to the folding unit exit
rollers.
1 A3 SEF
2 B4 SEF
3 A4 SEF
4 B5 SEF
5 DLT SEF
6 LG SEF
7 LT SEF
8 12"x18"
9 Other
[0 to 6/0/1]
0: No repeated fold
1: 2
2: 5
3: 10
4: 15
5: 25
6: 30
6114
Free Run DFU
3000-Sheet Finisher B830
These SPs set the switch the following free run modes for Finisher 2 (B830).
Touch [ON] to switch on, [OFF] to switch off.
1 Free Run 1 System Free Run
2 Free Run 1 Free Run (Endurance Testing)
3 Free Run 3 Free Run
4 Free Run 4 Shift, Free Run
Rev. 09/24/2009
To Next Page
