Group 6000
SM 5-257 D014/D015/D078/D079
Service
Tables
10 LG SEF
11 LT SEF
12 LT LEF
13 HLT SEF
14 HLT LEF
15 Custom
6153 Adj Prestack Shts:Fin2 3000-Sheet Finisher B830
This SP sets the number of sheets sent to the pre-stack tray. With this SP set to
the default (3):
3 sheets are sent to the pre-stack tray.
When the 4th sheet feeds, the 4th sheet and 3 sheets from the pre-stack
tray are sent to the stapling tray together.
Note: You may need to adjust this setting or switch it off when feeding thick or
slick paper.
1 A4 LEF
2 B5 LEF
3 LT LEF
4 Other
[0 to 2/2/1 sheet]
0: None
1: 1 sheet
2: 2 sheets
6154 Adj Top Fence Pos 3000-Sheet Finisher B830
Use this SP to adjust the timing of the top fence motor that positions the top
fence.
Note: After all the pages of a stack have been fed onto the stapling tray, the top
fence jogs the stack vertically to align the leading edge of the stack for stapling.
1 A4 LEF [-5 to 10/0/0.1 mm]
2 B5 LEF [-5 to 2/0/0.1 mm]
3 LT LEF [-5 to 10/0/0.1 mm]
Rev. 08/2008
To Next Page
Loading...
