Ricoh D014 - Page 957

Process Control
SM 6-53 D014/D015/D078/D079
Detailed
Descriptions
When is MUSIC done?
Normally, MUSIC executes automatically:
 Immediately after the machine is turned on or returns from an energy save mode.
 At the start of a job, if the temperature in the laser exposure unit changed since the end
of the job by the amount set with SP2153 020 (Default: 1.5°C)
 After process control (enable/disable with SP2153 002).
 Every 100 pages during a long color job (you can change the interval with SP2153
024) if the temperature in the laser exposure unit has changed since the end of the
most recent MUSIC adjustment by the amount set with SP2153 020 (Default: 1.5
o
C)
 Forced MUSIC (manually by the user or a technician)
1) User Tools> Maintenance> Color Registration
2) SP 2111 001
Here are some important points to remember about MUSIC:
 Immediately after the machine is turned on, MUSIC requires time to complete
processing. But you can do a black-and-white job immediately.
 If a job is started before the MUSIC process has completed, a message ("Now Self
Checking") will appear on the operation panel display.
 The job will not be done until the MUSIC process is finished. Wait for MUSIC to
complete.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA