R&S ZNB Series User Manual

Command reference
R&S
®
ZNB/ZNBT
1098User Manual 1173.9163.02 ─ 62
DIAGnostic:DEVice:STATe <Filename>
Generates a system report and writes it to the specified file. See Chapter 9.3, "Collect-
ing information for technical support", on page 1532.
Setting parameters:
<Filename> String parameter containing the file name. If no path is specified,
the file is stored to the directory
C:\Users\Public\Documents\Vna\Report; the extension
*.zip is appended automatically.
*RST: n/a
Example:
DIAG:DEV:STAT 'report_16032011_1120'
Generate a report and store it to
C:\Users\Public\Documents\Vna\Report\
report_16032011_1120. Use the MMEMory... commands to
rename, move, or delete the file.
Usage: Setting only
Manual operation: See "Save..." on page 766
DIAGnostic:DUMP:SIZE <DumpSize>
Determines the level of detail and hence the size of the dump files created in case of
firmware exceptions.
Parameters:
<DumpSize> NONE | MINI | NORMal | LARGe | FULL
Either disables dump file creation (NONE) or determines the
level of detail.
Manual operation: See "Error Dump Type" on page 760
DIAGnostic:PRODuct:OPTion:INFO? <Option>, <Detail>
Queries a property of an installed software option, identified by its name.
Query parameters:
<Option> Option name, e.g. 'ZNB-K2' or 'ZNBT-K2'.
<Detail> DESCription | TYPE | ACTivation | EXPiration | KEY
You can query for an option's DESCription, its KEY and key
TYPE, and its ACTivation and EXPiration date (if applicable).
Example:
DIAGnostic:PRODuct:OPTion:INFO? 'ZNB-K2',DESC
On a R&S ZNB this returns 'Time Domain Analysis' (if
installed).
Usage: Query only
Manual operation: See "Software Option Info" on page 768
SCPI command reference

R&S ZNB Series Specifications

General

Brand	R&S
Model	ZNB Series
Category	Measuring Instruments
Language	English