Command reference
R&S
®
ZNB/ZNBT
1143User Manual 1173.9163.02 ─ 62
Query parameters:
<CalKitFile> Path to the cal kit file, either absolute or relative to the current
directory (see MMEMory:CDIRectory)
<Detail> CONNector | LABel | NAME | GENDer
If specified, the command only returns the corresponding prop-
erty
Return values:
<ConnectorType>
<CalKitName>
<KitLabel>
<Gender> 1: has a gender
0: doesn't have a gender
Usage: Query only
MMEMory:COPY
<SourceFile>, <NewFile>
Copies an existing file to a new file.
Setting parameters:
<SourceFile>
<NewFile> String parameters to specify the name of the file to be copied
and the name of the new file.
*RST: n/a
Example:
MMEM:COPY 'C:\Users\Public\Documents\
Rohde-Schwarz\Vna\RecallSets\SET1.znx','D:'
Copy file Set1.znx in directory
C:\Users\Public\Documents\Rohde-Schwarz\Vna\
RecallSets to the external storage medium, mapped to drive
D:.
Usage: Setting only
MMEMory:DATA <Filename>[, <DataBlock>]
Loads a <DataBlock> into the file <FileName>.
Parameters:
<Filename> String parameter to specify the name of the file.
<DataBlock> <block_data>
Data in IEEE488.2 block data format. The delimiter EOI must be
selected to achieve correct data transfer.
Example:
MMEM:DATA? 'C:\Users\Public\TEST01.HCP'
Query the block data contained in file TEST01.HCP.
SCPI command reference
To Next Page
Loading...
