R&S ZNB Series - Page 1144

Command reference
R&S
®
ZNB/ZNBT
1144User Manual 1173.9163.02 ─ 62
MMEMory:DELete <File>[, <Force>]
Removes a file from the specified directory.
Setting parameters:
<File> Mandatory string parameter containing the path and file name of
the removed file. If the path is omitted, the current directory is
used (see MMEMory:CDIRectory).
<Force> FORCe
Optional parameter, allows you to delete read-only files, too.
Example:
MMEM:DEL 'C:\Users\Public\TEST01.HCP'
Remove file TEST01.HCP from the directory C:
\Users\Public. The file must not be read-only; otherwise the
additional parameter FORCe is required.
Usage: Setting only
MMEMory:DELete:CORRection <CalGroupName>
Deletes a system error correction data set stored in the cal pool (cal group file).
Setting parameters:
<CalGroupName> String parameter to specify the name of the cal group file to be
deleted. Cal group files must have the extension *.cal. The
directory path must not be specified; the analyzer always uses
the default cal pool directory
C:\Users\Public\Documents\Rohde-Schwarz\Vna\
Calibration\Data.
Example: See MMEMory:LOAD:CORRection
Usage: Setting only
Manual operation: See "Pool / Delete from Pool" on page 536
MMEMory:FAVorite<FavId> <RecallSetFile>
Manages the list of favorite recall sets
Suffix:
<FavId>
.
Position in the favorites list
Setting parameters:
<RecallSetFile> File path, either absolute or relative to the current directory (see
MMEMory:CDIRectory). The empty string represents an empty
position in the favorites list.
Note that when a non-empty favorite is set, the target recall set
must exist.
SCPI command reference