R&S ZNB Series - Page 1160

Command reference
R&S
®
ZNB/ZNBT
1160User Manual 1173.9163.02 ─ 62
FPORts (or omitted)
Standard interpretation: odd port numbers towards VNA, even
port numbers towards DUT
IPORts
For s2p files IPORts means "inverted port sequence": network
port 2 towards VNA, network port 1 towards DUT
For s4p files IPORts means "increasing port sequence": low
port numbers towards VNA, high port numbers towards DUT
SGATes
Swapped gates: even port numbers towards VNA, odd port
numbers towards DUT
SINCreasing
Swapped increasing port sequence: high port numbers towards
VNA, low port numbers towards DUT
Example:
*RST; SOUR:LPOR1 1,2; LPOR2 3,4
Define a balanced port configuration.
CALC:TRAN:VNET:BAL:DEEM:TND STSL
Select the "Serial .s2p data, shunt L" circuit model.
MMEM:LOAD:VNET:BAL:DEEM2 'C:\Users\Public
\Documents\Rohde-Schwarz\Vna\VNET\Test.s2p',
PMA
Load a Touchstone file and assign it to logical port no. 2.
Manual operation: See "File Name <i>/Swap Gates" on page 612
MMEMory:LOAD:VNETworks<Ch>:DIFFerential:EMBedding<LogPt>
<TouchstoneFile>[, <Interchange>]
Loads data of a Differential match embedding network from the specified Touchstone
*.s2p file.
Use CALCulate<Ch>:TRANsform:VNETworks:BALanced:EMBedding<LogPt>:
PARameters:DATA<Port> to load circuit data from the remote client instead.
The query returns the name of the loaded file.
Suffix:
<Ch>
.
Channel number
<LogPt> Logical port number of a balanced port
Parameters:
<TouchstoneFile> String parameter to specify the name and directory of the loaded
*.s2p file.
If no path is specified the analyzer searches the current direc-
tory, which can be set and queried using MMEMory:
CDIRectory
<Interchange> FPORts | IPORts | SGATes
SCPI command reference