R&S ZNB Series User Manual

Command reference
R&S
®
ZNB/ZNBT
1444User Manual 1173.9163.02 ─ 62
Indicates the start of the binary block
<Digits>
Decimal value
Gives the number of decimal digits used for the <Length>
value
<Length>
Decimal value
Number of bytes the follow in the <Binary data> part
<Binary data>
Binary data in ASCII format
Example: //Return complete HUMS data
DIAG:HUMS?
Usage: Query only
DIAGnostic:HUMS:BIOS?
Queries the BIOS information from the instrument. Depending on the set data format,
the queried data is either displayed in XML or JSON format. For more information about
setting the data format, see DIAGnostic:HUMS:FORMat on page 1447.
Return values:
<BIOSInfo> <block_data>
BIOS information of the connected instrument as block data in a
comma-separated list.
#<manufacturer>,<serialNumber>,<version>,
<releaseDate>,<caption>,<isPresent>
Binary block data with the following syntax:
#<Digits><Length><Binarydata>
#
Indicates the start of the binary block
<Digits>
Decimal value
Gives the number of decimal digits used for the <Length>
value
<Length>
Decimal value
Number of bytes the follow in the <Binary data> part
<Binary data>
Binary data in ASCII format
Example:
//Return BIOS information
DIAG:HUMS:BIOS?
Usage: Query only
DIAGnostic:HUMS:DELete:ALL
Deletes the complete HUMS data. This includes device history, device tags, SCPI con-
nections, utilization history and utilizations.
HUMS and service date commands

R&S ZNB Series Specifications

General

Brand	R&S
Model	ZNB Series
Category	Measuring Instruments
Language	English