To Next Page

To Previous Page

Command reference

R&S

ZNB/ZNBT

1447User Manual 1173.9163.02 ─ 62

Example: //Return device footprint

DIAG:HUMS:EQU?

Usage: Query only

DIAGnostic:HUMS:FORMat <DataFormat>

Selects the format for the queried HUMS data. You can query the HUMS data either in

JSON format or XML format.

The defined format affects all other commands that return block data.

Parameters:

<DataFormat> JSON | XML

JSON

Returns the HUMS data in JSON format.

XML

Returns the HUMS data in XML format.

*RST: JSON

Example: //Return data in JSON format

DIAG:HUMS:FORM JSON

DIAGnostic:HUMS:SAVE <path>

Saves the HUMS history as a ZIP file to your preferred path.

Setting parameters:

<path>

Example: //Save HUMS history data

DIAG:HUMS:SAVE 'C:\HUMS\hums_2021.zip'

Usage: Setting only

DIAGnostic:HUMS:SECurity?

Queries the security information of the instrument. Depending on the set data format,

the queried data is either displayed in XML or JSON format. For more information about

setting the data format, see DIAGnostic:HUMS:FORMat on page 1447.

Return values:

Security information of the connected instrument as block data

in a comma-separated list.

#blockdata{"antimalware":

{<name>,<enabled>,<upToDate>,<timestamp>},

"firewallEnabled"}

Binary block data with the following syntax:

#<Digits><Length><Binarydata>

HUMS and service date commands

R&S ZNB Series User Manual

Questions and Answers: