R&S ZNB Series - Page 851

Command reference
R&S
®
ZNB/ZNBT
851User Manual 1173.9163.02 ─ 62
CALCulate<Ch>:DATA:CALL:CATalog?
Returns all traces which are available for CALCulate<Ch>:DATA:CALL in channel
no. <Ch>. The response is a string parameter with all S-parameter traces in the current
channel or in the active system error correction; see example.
Suffix:
<Ch>
.
Channel number
Example: See CALCulate<Ch>:DATA:CALL
Usage: Query only
CALCulate<Ch>:DATA:CHANnel:ALL?
<Format>
Reads the current response values of all traces of the selected channel.
Suffix:
<Ch>
.
Channel number
Query parameters:
<Format> FDATa | SDATa | MDATa
Output format for the S-parameter data, see
CALCulate<Chn>:DATA.
Return values:
<Data> Trace data either in ASCII or block data format, depending on
the current FORMat[:DATA] setting.
Usage: Query only
CALCulate<Ch>:DATA:CHANnel:DALL? <Format>
Reads the current response values of all data traces of the selected channel. Use
CALCulate<Ch>:DATA:CHANnel:ALL? to query data traces and memory traces.
Suffix:
<Ch>
.
Channel number
Query parameters:
<Format> FDATa | SDATa | MDATa
Output format for the S-parameter data, see
CALCulate<Chn>:DATA.
Return values:
<Data> Trace data either in ASCII or block data format, depending on
the current FORMat[:DATA] setting.
Usage: Query only
SCPI command reference