R&S ZNB Series User Manual

Command reference
R&S
®
ZNB/ZNBT
866User Manual 1173.9163.02 ─ 62
Parameters:
<RiseThreshold> T1_9 | T2_8
T1_9: 10% to 90% (of the voltage amplitude between 1-level
and 0-level)
This is the default threshold for eye diagrams.
T2_8: 20% to 80%
Options: R&S ZNB/ZNBT-K20
Manual operation: See "Rise Time / Rise Time Definition" on page 694
CALCulate<Chn>:EYE:JITTer:DIRac:DELTa <DiracDelta>
Defines the magnitude of the Dirac jitter in the generator simulation of the related eye
diagram.
This command will raise an execution error if the active trace in the selected channel is
not an eye diagram.
Dirac jitter insertion can be enabled using CALCulate<Chn>:EYE:JITTer:TYPE:
PERiodic.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<DiracDelta> *RST: 1 ns
Default unit: s
Options: R&S ZNB/ZNBT-K20
Manual operation: See "Dirac" on page 700
CALCulate<Chn>:EYE:JITTer:DIRac:PROBability <DiracProbability>
Defines the probability of the Dirac jitter in the generator simulation of the related eye
diagram.
This command will raise an execution error if the active trace in the selected channel is
not an eye diagram.
Dirac jitter insertion can be enabled using CALCulate<Chn>:EYE:JITTer:TYPE:
PERiodic.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<DiracProbability> Probability of the jitter occurring at each symbol period
*RST: 0.5
Options: R&S ZNB/ZNBT-K20
Manual operation: See "Dirac" on page 700
SCPI command reference

R&S ZNB Series Specifications

General

Brand	R&S
Model	ZNB Series
Category	Measuring Instruments
Language	English