Group 2000
D014/D015/D078/D079 5-88 SM
2903 Env Thresh: PCU
This SP sets the threshold value of LL and ML for the current room temperature.
1 Abs Humid: 1
2 Abs Humid: 2
3 Abs Humid: 3
4 Abs Humid: 4
5 Abs Humid: 5
[0 to 100/0.01 g/m
3
]
2904 Prevent Blade Bending
A blade-bend prevention pattern is created with K toner on the ITB between every
copy image to lubricate the ITB cleaning blade so it will not bend or scour the
surface of the ITB. These SPs set 1) pattern creation interval, 2) density of the
pattern, 3) whether the pattern is displayed, 4) the temperature at which the
operation is done.
Note: This function is OFF. Changing this setting is normally not required for this
machine.
1 Pattern Create Interval
Sets the number of pages between patterns.
[0 to 200/1 pg.]
2 Pattern Light Intensity
Sets the density of the pattern.
[0 to 63/1]
3 Op Pg Count Display
Displays the count for the number of blade prevention
patterns.
[0 to 200/1 pg.]
4 Set Operation Temp
Sets the threshold temperature for this SP code to start
operating.
[0 to 50/ 1 deg]
To Next Page
Loading...
