Group 5000
SM 5-195 D014/D015/D078/D079
Service
Tables
Outside Line Outgoing Number
154
The SP sets the number that switches to PSTN for the outside connection for
embedded RCG-M in a system that employs a PBX (internal line).
If the execution of SP5816-151 has succeeded and embedded RCG-M has
connected to the external line, this SP display is completely blank.
If embedded RCG-M has connected to an internal line, then the number of
the
connection to the external line is displayed.
If embedded RCG-M has connected to an external line, a comma is
displayed with
the number. The comma is inserted for a 2 sec. pause.
The number setting for the external line can be entered manually (including
commas).
Remove Service: PPP Certification Timeout (SSP)
155
Sets the length of the timeout for the embedded RCG-M connection to its access
point. The timeout is the time from when the modem sends the ATD to when it
receives the result code.
[1 to 65536 / 60 / 1 /step]
Dial Up User Name
156
Use this SP to set a user name for access to remote dial up. Follow these rules
when setting a user name:
Name length: Up to 32 characters
Spaces and # allowed but the entire entry must be enclosed by double
quotation marks (").
Dial Up Password
157
Use this SP to set a password for access to remote dial up. Follow these rules
when setting a user name:
Name length: Up to 32 characters
Spaces and # allowed but the entire entry must be enclosed by double
quotation marks (").
To Next Page
Loading...
