R&S ZNB Series - Page 1141

Command reference
R&S
®
ZNB/ZNBT
1141User Manual 1173.9163.02 ─ 62
Name and (possibly) directory of the cal kit file to be used for the
automatic calibration (optional string parameter):
– If the parameter is omitted, the analyzer uses the last charac-
terized cal kit file.
– If an empty string (' ') is specified, the factory cal kit file
stored in the active calibration unit (SYSTem:COMMunicate:
RDEVice:AKAL:ADDRess) is used. By default this file is also
used in manual control.
– A cal kit file name *.calkit without path denotes a specific
cal kit file stored in the active calibration unit.
– A cal kit file name *.calkit with path denotes a specific cal
kit file stored in an arbitrary directory.
Example:
MMEM:AKAL:USER:CONV 'C:\Users\Public\
Documents\Rohde-Schwarz\Vna\AKAL\Touchstone'
Convert and copy the calibration data of the standards of the last
characterized cal kit to the specified (writable) directory.
MMEM:AKAL:USER:CONV 'C:\Users\Public\
Documents\Rohde-Schwarz\Vna\AKAL\Touchstone',
'user.calkit'
Convert and copy the calibration data of the standards of the
user-defined cal kit 'user.calkit' to the specified directory.
Usage: Setting only
Manual operation: See "Apply/Cancel" on page 458
MMEMory:CATalog? [<Directory>]
Returns the contents of the current or of a specified directory. The directory information
is returned in the following format:
<Used Size>, <FreeDiskSpace>{,<FileEntry>}{,<DirectoryEntry>}
The information elements indicate the following:
●
<Used Size> – disk space in bytes used by the listed files, excluding subdirectories
●
<FreeDiskSpace> – available free disk space in bytes
●
<FileEntry> – file name, (blank), file size in bytes
●
<DirectoryEntry> – directory name, <Dir>, (blank)
Tip: Use MMEMory:CATalog:ALL? to query the contents of the current directory and
all subdirectories.
Query parameters:
<Directory> String parameter to specify the directory. If the directory is omit-
ted, the command queries the contents of the current directory,
to be queried with MMEMory:CDIRectory?.
Example:
MMEM:CAT?
Possible response: 0, 771604480, calibration,
<DIR>, , colorschemes, <DIR>, ,....
SCPI command reference