R&S ZNB Series - Page 1140

Command reference
R&S
®
ZNB/ZNBT
1140User Manual 1173.9163.02 ─ 62
MMEMory:STORe:CORRection.....................................................................................1167
MMEMory:STORe:CORRection:TCOefficient<Ch>.......................................................... 1168
MMEMory:STORe:EYE:MASK.......................................................................................1168
MMEMory:STORe:EYE:MASK:RESults.......................................................................... 1169
MMEMory:STORe:EYE:MEASurements......................................................................... 1169
MMEMory:STORe:LIMit................................................................................................ 1170
MMEMory:STORe:MARKer...........................................................................................1170
MMEMory:STORe:RIPPle............................................................................................. 1171
MMEMory:STORe:SEGMent......................................................................................... 1171
MMEMory:STORe:STATe..............................................................................................1172
MMEMory:STORe:TRACe.............................................................................................1172
MMEMory:STORe:TRACe:CHANnel.............................................................................. 1173
MMEMory:STORe:TRACe:OPTion:BALanced................................................................. 1175
MMEMory:STORe:TRACe:OPTion:SYMMetric................................................................ 1175
MMEMory:STORe:TRACe:OPTion:COMMent................................................................. 1175
MMEMory:STORe:TRACe:OPTion:DECimals:DATA........................................................ 1175
MMEMory:STORe:TRACe:OPTion:DECimals:STIMulus................................................... 1175
MMEMory:STORe:TRACe:OPTion:FORMat....................................................................1176
MMEMory:STORe:TRACe:OPTion:PLUS....................................................................... 1176
MMEMory:STORe:TRACe:OPTion:SSEParator...............................................................1176
MMEMory:STORe:TRACe:OPTion:TABS........................................................................1176
MMEMory:STORe:TRACe:OPTion:TRIM........................................................................ 1177
MMEMory:STORe:TRACe:PORTs................................................................................. 1177
MMEMory:AKAL:FACTory:CONVersion <Directory>
Converts the factory calibration data of the standards in the active calibration unit
(SYSTem:COMMunicate:RDEVice:AKAL:ADDRess) to Touchstone format and cop-
ies it to the specified directory.
Setting parameters:
<Directory> String parameter to specify the directory.
Example:
MMEM:AKAL:FACTory:CONVersion 'C:\Users\Public\
Documents\Rohde-Schwarz\Vna\AKAL\Touchstone'
Convert and copy the factory calibration data of the active cali-
bration unit to the specified (writable) directory.
Usage: Setting only
Manual operation: See "Apply/Cancel" on page 458
MMEMory:AKAL:USER:CONVersion <Directory>[, <CalKitFile>]
Converts an arbitrary (e.g. user-defined) set of calibration data of the standards in the
active calibration unit (SYSTem:COMMunicate:RDEVice:AKAL:ADDRess) to Touch-
stone format and copies it to the specified directory.
Setting parameters:
<Directory> String parameter to specify the directory.
<CalKitFile>
SCPI command reference