Command reference
R&S
®
ZNB/ZNBT
1176User Manual 1173.9163.02 ─ 62
Manual operation: See "Decimal Places" on page 369
MMEMory:STORe:TRACe:OPTion:FORMat <TS_Frmt>
Selects the file format to be generated during Touchstone export.
Parameters:
<TS_Frmt> F11 | F20 | L11
F11
Trace output according to Touchstone standard 1.1 (new library)
F20
Trace output according to Touchstone standard 2.0 (new library)
L11
Legacy Touchstone 1.1 output
F11 and L11 slightly differ w.r.t. casing, number formatting and
comments. F20 adds keywords etc. introduced with Touchstone
standard version 2.0.
Manual operation: See "File Format" on page 369
MMEMory:STORe:TRACe:OPTion:PLUS <arg0>
This command defines how positive numbers are prefixed during Touchstone file
export: by a leading space, a plus sign or not at all.
Parameters:
<arg0> SPACe | PLUS | VOID
Manual operation: See "Positive Number Prefix" on page 760
MMEMory:STORe:TRACe:OPTion:SSEParator <Boolean>
This command defines whitespace insertion during Touchstone file export.
If set to ON, separator lines are skipped, i.e. the content parts are no longer separated
by blank lines.
Parameters:
<Boolean>
Manual operation: See "Skip Separator Lines" on page 760
MMEMory:STORe:TRACe:OPTion:TABS <Boolean>
This command defines whitespace insertion during Touchstone file export.
If set to ON, columns are separated by tabs rather than spaces.
Parameters:
<Boolean>
Manual operation: See "Use TAB (instead of blanks)" on page 760
SCPI command reference
To Next Page
Loading...
Need help?
General
