R&S ZNB Series - Page 1165

Command reference
R&S
®
ZNB/ZNBT
1165User Manual 1173.9163.02 ─ 62
MMEMory:MSIS <Drive> is equivalent to MMEMory:CDIRectory <Drive>. In par-
ticular, it sets the current directory to the base directory of the specified drive.
Parameters:
<Drive> Drive letter, followed by a colon, e.g. 'D:'
Example:
MMEMory:CDIRectory DEFault
selects the default directory
C:\Users\Public\Documents\Rohde-Schwarz\Vna.
MMEMory:MSIS?
returns C:.
MMEMory:CATalog? 'hardcopy'
lists the contents of
C:\Users\Public\Documents\Rohde-Schwarz\Vna\
hardcopy.
MMEMory:CATalog? '\hardcopy'
lists the contents of D:\hardcopy.
MMEMory:NAME <Filename>
Defines a name for a file which can be used to store the printer output. The file is cre-
ated when it is selected as a printer destination (HCOPy:DESTination 'MMEM').
Parameters:
<Filename> String parameter to specify the file name. The supported file for-
mats are *.wmf, *.ewmf, *.bmp, *.png; see command
HCOPy:DEVice:LANGuage. The specified directory must exist,
otherwise no file can be generated. If no path is specified the
analyzer uses the current directory, to be queried with
MMEMory:CDIRectory?.
*RST: 'Hardcopy'
Example:
MMEM:NAME 'C:
\Users\Public\Screenshots\PLOT1.BMP'
Define a printer file name, to be stored in the existing directory
C:\Users\Public\Screenshots (without creating the file).
HCOP:DEST 'MMEM'; :HCOP
Select "Print to file" and create the printer file specified before.
MMEMory:RDIRectory <Directory>
Removes an existing directory from the mass memory storage system.
Setting parameters:
<Directory> String parameter to specify the directory.
Example:
MMEM:RDIR 'C:
\Users\Public\NetworkService\Application Data'
Removes the specified directory.
Usage: Setting only
SCPI command reference