R&S ZNB Series User Manual

Command reference
R&S
®
ZNB/ZNBT
1440User Manual 1173.9163.02 ─ 62
SYSTem:COMMunicate:SNMP:USM:USER:DELete:ALL................................................. 1442
SYSTem:COMMunicate:SNMP:VERSion........................................................................1442
SYSTem:COMMunicate:REST:ENABle...........................................................................1443
SYSTem:COMMunicate:SNMP:COMMunity:RO <CommunityString>
Defines the SNMP community string for read-only access.
Prerequisites for this command:
●
Select an SNMP version that supports communities (SYSTem:COMMunicate:
SNMP:VERSion on page 1442).
Setting parameters:
<CommunityString> String containing the community name.
Example: //Set community name
SYST:COMM:SNMP:VERS V12
SYST:COMM:SNMP:COMM:RO 'ABC'
Usage: Setting only
Manual operation: See "SNMPv2c Configuration" on page 764
SYSTem:COMMunicate:SNMP:COMMunity:RW <CommunityString>
Defines the SNMP community string for read-write access.
Prerequisites for this command:
●
Select an SNMP version that supports communities (SYSTem:COMMunicate:
SNMP:VERSion on page 1442).
Setting parameters:
<CommunityString> String containing the community name.
Example: //Set read-write access
SYST:COMM:SNMP:VERS V12
SYST:COMM:SNMP:COMM:RW 'ABC'
Usage: Setting only
Manual operation: See "SNMPv2c Configuration" on page 764
SYSTem:COMMunicate:SNMP:CONTact <SnmpContact>
Defines the SNMP contact information for the administrator.
You can also set the contact information via SNMP if you do not set it via SCPI.
Parameters for setting and query:
<SnmpContact> String containing SNMP contact.
*RST: "" (empty string)
Example: //Set SNMP contact
SYST:COMM:SNMP:CONT 'ABC'
HUMS and service date commands

R&S ZNB Series Specifications

General

Brand	R&S
Model	ZNB Series
Category	Measuring Instruments
Language	English