R&S ZNB Series - Page 954

Command reference
R&S
®
ZNB/ZNBT
954User Manual 1173.9163.02 ─ 62
CALCulate<Chn>:MARKer:MPEak:EXCursion:STATe <Boolean>
Activates or deactivates the minimum excursion for multiple peak searches.
Use CALCulate<Chn>:MARKer:MPEak:EXCursion to set the minimum peak excur-
sion.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Active> Boolean
Manual operation: See "Excursion Settings" on page 404
CALCulate<Chn>:MARKer:MPEak:THReshold <Value>
Defines a threshold value for multiple peak searches.
Use CALCulate<Chn>:MARKer:MPEak:THReshold:STATe to activate it.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Value> Threshold value
The unit is derived from the active trace format and cannot be
modified. Changing the trace format resets the threshold to a
format-specific default value.
Manual operation: See "Threshold Settings" on page 403
CALCulate<Chn>:MARKer:MPEak:THReshold:STATe <Boolean>
Activates or deactivates the threshold for multiple peak searches.
Use CALCulate<Chn>:MARKer:MPEak:THReshold to set the threshold value.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Active> Boolean
Manual operation: See "Threshold Settings" on page 403
CALCulate<Chn>:MARKer<Mk>:NAME <MarkerName>
CALCulate<Chn>:MARKer<Mk>:REFerence:NAME <MarkerName>
Defines a name for the related marker (see "Marker addressing" on page 940). The
marker doesn't have to be created before, the name can be assigned in advance.
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Mk> Marker number (ignored for reference markers)
SCPI command reference