R&S ZNB Series - Page 895

Command reference
R&S
®
ZNB/ZNBT
895User Manual 1173.9163.02 ─ 62
CALCulate:FMODel:DELT:FREQuencies:CURRent?
Returns the frequencies at which the Delta-L algorithm calculates the loss-per-inch
uncertainties.
You can use the algorithms's default or custom frequencies (see CALCulate:
FMODel:DELT:FREQuencies:USEDefault).
Usage: Query only
Options: R&S ZNB/ZNBT-K231
Manual operation: See "Frequencies" on page 663
CALCulate:FMODel:DELT:FREQuencies:CURRent:COUNt?
Returns at how many frequencies the Delta-L algorithm calculates the loss-per-inch
uncertainties.
Use CALCulate:FMODel:DELT:FREQuencies:CURRent? to query the list of fre-
quencies.
Usage:
Query only
Options: R&S ZNB/ZNBT-K231
Manual operation: See "Frequencies" on page 663
CALCulate:FMODel:DELT:FREQuencies:DEFault?
Returns the frequencies at which the Delta-L algorithm calculates the loss-per-inch
uncertainties per default.
You can either use the algorithms's default or custom frequencies (see CALCulate:
FMODel:DELT:FREQuencies:USEDefault).
Usage:
Query only
Options: R&S ZNB/ZNBT-K231
Manual operation: See "Frequencies" on page 663
CALCulate:FMODel:DELT:FREQuencies:DEFault:COUNt?
Returns the number of frequencies at which the Delta-L algorithm calculates the loss-
per-inch uncertainties per default.
Use CALCulate:FMODel:DELT:FREQuencies:DEFault? to query the frequencies.
Usage:
Query only
Options: R&S ZNB/ZNBT-K231
Manual operation: See "Frequencies" on page 663
SCPI command reference