NetApp CN1610 - Show Snmp Group; Show Snmp Source-Interface

104 SNMP Commands
show snmp group This command displays the configured groups.
show snmp source-
interface
Use this command in Privileged EXEC mode to display the configured global
source-interface (Source IP address) details used for an SNMP client.
Format
show snmp filters [filtername]
Mode Privileged EXEC
Parameter Description
Name The filter name for this entry.
OID Tree The OID tree this entry will include or exclude.
Type Indicates if this entry includes or excludes the OID
Tree.
Format
show snmp group [groupname]
Mode Privileged EXEC
Parameter Description
Name The name of the group.
Security Model Indicates which protocol can access the system via
this group.
Security Level Indicates the security level allowed for this group.
Read View The view this group provides read access to.
Write View The view this group provides write access to.
Notify View The view this group provides trap access to.
Format
show snmp source-interface