NetApp CN1610 - No Lldp Med Transmit-Tlv Command; Show Lldp Med; Show Lldp Med Interface

560 LLDP-MED Commands
no lldp med
transmit-tlv
Use this command to remove a TLV.
show lldp med Use this command to display a summary of the current LLDP MED
configuration.
The following shows example CLI display output for the command.
(CN1610) #show lldp med
LLDP MED Global Configuration
Fast Start Repeat Count: 3
Device Class: Network Connectivity
(CN1610) #
show lldp med
interface
Use this command to display a summary of the current LLDP MED
configuration for a specific interface.
unit/slot/port indicates a specific
physical interface.
all indicates all valid LLDP interfaces.
ex-pse Transmit the LLDP extended PSE TLV.
inventory Transmit the LLDP inventory TLV.
location Transmit the LLDP location TLV.
network-policy Transmit the LLDP network policy TLV.
Term Definition
Format
no lldp med transmit-tlv [capabilities] [network-
policy] [ex-pse] [ex-pd] [location] [inventory]
Mode Global Config
Format
show lldp med
Mode Privileged EXEC
Format
show lldp med interface { unit/slot/port | all}