554 LLDP (802.1AB) Commands
show lldp remote-
device detail
Use this command to display detailed information about remote devices that
transmit current LLDP data to an interface on the system.
Format
show lldp remote-device detail
slot/port
Mode Privileged EXEC
Term Definition
Local Interface The interface that received the LLDPDU from the
remote device.
Remote Identifier An internal identifier to the switch to mark each
remote device to the system.
Chassis ID Subtype The type of identification used in the Chassis ID
field.
Chassis ID The chassis of the remote device.
Port ID Subtype The type of port on the remote device.
Port ID The port number that transmitted the LLDPDU.
System Name The system name of the remote device.
System Description Describes the remote system by identifying the
system name and versions of hardware, operating
system, and networking software supported in the
device.
Port Description Describes the port in an alpha-numeric format. The
port description is configurable.
System Capabilities
Supported
Indicates the primary function(s) of the device.
System Capabilities
Enabled
Shows which of the supported system capabilities
are enabled.
Management Address For each interface on the remote device with an
LLDP agent, lists the type of address the remote
LLDP agent uses and specifies the address used to
obtain information related to the device.
To Next Page
Loading...
