NetApp CN1610 - No Exception Dump Ftp-Server; Exception Dump Compression; No Exception Dump Compression; Write Core

266 Serviceability Packet Tracing Commands
no exception dump
ftp-server
This command resets exception dump remote FTP server configuration to its
factory default value. This command also resets the FTP username and password
to empty string.
exception dump
compression
This command enables compression mode.
no exception dump
compression
This command disables compression mode.
write core Use the
write core command to generate a core dump file on demand. The
write core test command is helpful when testing the core dump setup. For
example, if the TFTP protocol is configured,
write core test communicates
Default None
Format
exception dump ftp-server ip-address [{username user-
name
password password }]
Mode Global Config
Default None
Format
no exception dump ftp-server
Mode Global Config
Default Enabled
Format
exception dump compression
Mode Global Config
Default None
Format
no exception compression
Mode Global Config