EasyManua.ls Logo

NetApp CN1610 - Show Ip Verify Interface; Show Ip Source Binding

NetApp CN1610
708 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 5: Switching Commands 497
The following shows example CLI display output for the command.
(CN1610) #show ip verify source
Interface Filter Type IP Address MAC Address Vlan
--------- ----------- --------------- ----------------- -----
0/1 ip-mac 210.1.1.3 00:02:B3:06:60:80 10
0/1 ip-mac 210.1.1.4 00:0F:FE:00:13:04 10
show ip verify
interface
Use this command to display the IPSG filter type for a specific interface.
show ip source
binding
Use this command to display the IPSG bindings.
VLAN The VLAN for the binding rule.
Term Definition
Format
show ip verify interface slot/port
Mode Privileged EXEC
User EXEC
Term Definition
Interface Interface address in slot/port format.
Filter Type Is one of two values:
ip-mac: User has configured MAC address
filtering on this interface.
ip: Only IP address filtering on this interface.
Format
show ip source binding [{dhcp-snooping|static}]
[interface slot/port] [vlan id]
Mode Privileged EXEC
User EXEC

Table of Contents

Other manuals for NetApp CN1610

Related product manuals