Chapter 5: Switching Commands 447
lacp actor admin
key
Use this command to configure the administrative value of the LACP actor admin
key on an interface or range of interfaces. The valid range for
key is 0-65535.
This command is applicable only to physical interfaces.
no lacp actor admin
key
Use this command to configure the default administrative value of the key.
lacp actor admin
state individual
Use this command to set LACP actor admin state to individual.
This command is applicable only to physical interfaces.
no lacp actor admin
state individual
Use this command to set the LACP actor admin state to aggregation.
lacp actor admin
state longtimeout
Use this command to set LACP actor admin state to longtimeout.
Default Internal Interface Number of this Physical Port
Format
lacp actor admin key
key
Mode Interface Config
Format
no lacp actor admin key
Mode Interface Config
Format
lacp actor admin state individual
Mode Interface Config
Format
no lacp actor admin state individual
Mode Interface Config
Format
lacp actor admin state longtimeout
To Next Page
Loading...
