NetApp CN1610 - Dos-Control Icmpv4; No Dos-Control Icmpv4; Dos-Control Icmpv6; No Dos-Control Icmpv6

574 Denial of Service Commands
dos-control icmpv4 This command enables Maximum ICMPv4 Packet Size Denial of Service
protections. If the mode is enabled, Denial of Service prevention is active for this
type of attack. If ICMPv4 Echo Request (PING) packets ingress having a size
greater than the configured value, the packets will be dropped if the mode is
enabled.
no dos-control
icmpv4
This command disables Maximum ICMP Packet Size Denial of Service
protections.
dos-control icmpv6 This command enables Maximum ICMPv6 Packet Size Denial of Service
protections. If the mode is enabled, Denial of Service prevention is active for this
type of attack. If ICMPv6 Echo Request (PING) packets ingress having a size
greater than the configured value, the packets will be dropped if the mode is
enabled.
no dos-control
icmpv6
This command disables Maximum ICMP Packet Size Denial of Service
protections.
Default disabled (512)
Format
dos-control icmpv4 [0-16376]
Mode Global Config
Format
no dos-control icmpv4
Mode Global Config
Default disabled (512)
Format
dos-control icmpv6 0-16376
Mode Global Config
Format
no dos-control icmpv6
Mode Global Config