Chapter 4: Utility Commands 249
The following is an example of the command.
(Switching) #debug aaa authorization
Tacacs authorization receive packet tracing enabled.
(Switching) #debug tacacs authorization packet transmit
authorization tracing enabled.
(Switching) #no debug aaa authorization
AAA authorization tracing enabled
(Switching) #
debug
authentication
This command displays either the debug trace for either a single event or all
events for an interface
debug clear This command disables all previously enabled “debug” traces.
debug console This command enables the display of “debug” trace output on the login session in
which it is executed. Debug console display must be enabled in order to view any
trace output. The output of debug trace commands will appear on all login
sessions for which debug console has been enabled. The configuration of this
command remains in effect for the life of the login session. The effect of this
command is not persistent across resets.
Default none
Format
debug authentication packet {all | event}
interface
Mode Privileged EXEC
Default disabled
Format
debug clear
Mode Privileged EXEC
Default disabled
To Next Page
Loading...
