NetApp CN1610 - Show Interface Lag

166 System Information and Statistics Commands
show interface lag Use this command to display configuration information about the specified LAG
interface.
Format
show interface lag lag-intf-num
Mode Privileged EXEC
Parameters Definition
Packets Received
Without Error
The total number of packets (including broadcast
packets and multicast packets) received on the LAG
interface
Packets Received
With Error
The number of inbound packets that contained errors
preventing them from being deliverable to a higher-
layer protocol.
Broadcast Packets
Received
The total number of packets received that were
directed to the broadcast address. Note that this does
not include multicast packets.
Receive Packets
Discarded
The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet could be to free up buffer
space.
Packets Transmitted
Without Error
The total number of packets transmitted out of the
LAG.
Transmit Packets
Discarded
The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. A possible reason for
discarding a packet could be to free up buffer space.
Transmit Packets
Errors
The number of outbound packets that could not be
transmitted because of errors.
Collisions Frames The best estimate of the total number of collisions
on this Ethernet segment.