NetApp CN1610 - Script Apply; Script Delete; Script List

Chapter 3: Management Commands 131
Note
To specify a blank password for a user in the configuration script, you must
specify it as a space within quotes. For example, to change the password for user
jane from a blank password to hello, the script entry is as follows:
users passwd jane
" "
hello
hello
script apply This command applies the commands in the script to the switch. The
scriptname parameter is the name of the script to apply.
script delete This command deletes a specified script where the
scriptname parameter is the
name of the script to delete. The
all option deletes all the scripts present on the
switch.
script list This command lists all scripts present on the switch as well as the remaining
available space.
Format
script apply scriptname
Mode Privileged EXEC
Format
script delete { scriptname | all}
Mode Privileged EXEC
Format
script list
Mode Privileged EXEC
Term Definition
Configuration Script Name of the script.
Size Privileged EXEC