450 Port-Channel/LAG (802.3ad) Commands
no lacp actor port
priority
Use this command to configure the default priority value assigned to the
Aggregation Port.
lacp partner admin
key
Use this command to configure the administrative value of the Key for the
protocol partner. This command can be used to configure a single interface or a
range of interfaces. The valid range for
key is 0 to 65535.
This command is applicable only to physical interfaces.
no lacp partner
admin key
Use this command to set the administrative value of the Key for the protocol
partner to the default.
lacp partner admin
state individual
Use this command to set LACP partner admin state to individual.
This command is applicable only to physical interfaces.
Format
no lacp actor port priority
Mode Interface Config
Default 0x0
Format
lacp partner admin key
key
Mode Interface Config
Format
no lacp partner admin key
Mode Interface Config
Format
lacp partner admin state individual
Mode Interface Config
To Next Page
Loading...
