96 SNMP Commands
no snmp-server
filter
This command removes the specified filter.
snmp-server group This command creates an SNMP access group.
included The tree is included in the filter.
excluded The tree is excluded from the filter.
Parameter Description
Default No filters are created by default.
Format
snmp-server filter filtername [oid-tree]
Mode Global Config
Default Generic groups are created for all versions and privileges using the
default views.
Format
snmp-server group group-name {v1 | v2c | v3 {noauth |
auth | priv}} [context context-name] [read read-view]
[write write-view] [notify notify-view]
Mode Global Config
Parameter Description
group-name The group name to be used when configuring
communities or users. The range is 1 to 30
characters.
v1 This group can only access via SNMPv1.
v2 This group can only access via SNMPv2c.
v3 This group can only access via SNMPv3.
noauth This group can be accessed only when not using
Authentication or Encryption. Applicable only if
SNMPv3 is selected.
To Next Page
Loading...
