Chapter 4: Utility Commands 183
0 -rwx 1776 May 09 2002 16:44:38 slog1.txt
0 -rwx 356 Jun 17 2001 10:43:18 crashdump.ctl
0 -rwx 1024 May 09 2002 16:45:44 sslt.rnd
0 -rwx 14328276 May 09 2002 16:01:06 image2
0 -rwx 148 May 09 2002 16:46:06 hpc_broad.cfg
0 -rwx 0 May 09 2002 14:51:28 olog1.txt
0 -rwx 517 Jul 23 2001 17:24:00 ssh_host_key
0 -rwx 69040 Jun 17 2001 10:43:04
log_error_crashdump
0 -rwx 891 Apr 08 2000 11:14:28 sslt_key1.pem
0 -rwx 887 Jul 23 2001 17:24:00
ssh_host_rsa_key
0 -rwx 668 Jul 23 2001 17:24:34
ssh_host_dsa_key
0 -rwx 156 Apr 26 2001 13:57:46 dh512.pem
0 -rwx 245 Apr 26 2001 13:57:46 dh1024.pem
0 -rwx 0 May 09 2002 16:45:30 slog0.txt
show sysinfo This command displays switch information.
Format
show sysinfo
Mode Privileged EXEC
Term Definition
Switch Description Text used to identify this switch.
System Name Name used to identify the switch.The factory default
is blank. To configure the system name, see “snmp-
server” on page 89.
System Location Text used to identify the location of the switch. The
factory default is blank. To configure the system
location, see “snmp-server” on page 89.
System Contact Text used to identify a contact person for this switch.
The factory default is blank. To configure the system
location, see “snmp-server” on page 89.
System ObjectID The base object ID for the switch’s enterprise MIB.
To Next Page
Loading...
