NetApp CN1610 - Show Accounting Methods; Clear Accounting Statistics

Chapter 3: Management Commands 87
Number of Accounting Notifications sent at beginning of an EXEC
session: 0
Errors when sending Accounting Notifications beginning of an EXEC
session: 0
Number of Accounting Notifications at end of an EXEC session:
0
Errors when sending Accounting Notifications at end of an EXEC
session: 0
Number of Accounting Notifications sent at beginning of a command
execution: 0
Errors when sending Accounting Notifications at beginning of a
command execution: 0
Number of Accounting Notifications sent at end of a command
execution: 0
Errors when sending Accounting Notifications at end of a command
execution: 0
show accounting
methods
Use this command to display configured accounting method lists.
The following shows example CLI display output for the command.
(CN1610) #
(CN1610) #show accounting methods
Acct Type Method Name Record Type Method Type
---------- ------------ ------------ ------------
Exec dfltExecList start-stop TACACS
Commands dfltCmdsList stop-only TACACS
Commands UserCmdAudit start-stopTACACS
DOT1X dfltDot1xList start-stopradius
Line EXEC Method List Command Method List
------- ---------------------------------------
Console dfltExecList dfltCmdsList
Telnet dfltExecList dfltCmdsList
SSH dfltExecList UserCmdAudit
clear accounting
statistics
This command clears the accounting statistics.
Format
show accounting methods
Mode Privileged EXEC