NetApp CN1610 - Show Radius Accounting Statistics

Chapter 3: Management Commands 119
The following shows example CLI display output for the command.
(CN1610) #show radius accounting name
Host Address Server Name Port
Secret
Configured
----------------------- --------------------------------- --------
-----------
192.168.37.200 Network1_RADIUS_Server 1813
Yes
192.168.37.201 Network2_RADIUS_Server 1813 No
192.168.37.202 Network3_RADIUS_Server 1813
Yes
192.168.37.203 Network4_RADIUS_Server 1813 No
(CN1610) #show radius accounting name Default_RADIUS_Server
Server Name............................ Default_RADIUS_Server
Host Address........................... 192.168.37.200
RADIUS Accounting Mode................. Disable
Port .................................. 1813
Secret Configured ..................... Yes
show radius
accounting
statistics
This command displays a summary of statistics for the configured RADIUS
accounting servers.
Secret Configured Yes or No Boolean value indicating whether this
server is configured with a secret.
Term Definition
Format
show radius accounting statistics { ipaddr|dnsname |
name
servername }
Mode Privileged EXEC
Term Definition
ipaddr The IP address of the server.