Chapter 4: Utility Commands 303
show rmon
hcalarms
This command displays the entries in the RMON high-capacity alarm table.
Format
show rmon {hcalarms|hcalarm alarm index}
Mode Privileged EXEC
Parameter Description
High Capacity Alarm
Index
An arbitrary integer index value used to uniquely
identify the high capacity alarm entry. The range is 1
to 65535.
High Capacity Alarm
Vari ab le
The object identifier of the particular variable to be
sampled. Only variables that resolve to an ASN.1
primitive type of integer.
High Capacity Alarm
Interval
The interval in seconds over which the data is
sampled and compared with the rising and falling
thresholds. The range is 1 to 2147483647. The
default is 1.
High Capacity Alarm
Sample Type
The method of sampling the selected variable and
calculating the value to be compared against the
thresholds. Possible types are Absolute Val ue or
Delta Val ue . The default is Absolute Value.
High Capacity Alarm
Absolute Value
The absolute value (that is, the unsigned value) of
the hcAlarmVariable statistic during the last
sampling period. The value during the current
sampling period is not made available until the
period is complete. This object is a 64-bit unsigned
value that is Read-Only.
High Capacity Alarm
Absolute Alarm
Status
This object indicates the validity and sign of the data
for the high capacity alarm absolute value object
(hcAlarmAbsValueobject). Possible status types are
valueNotAvailable, valuePositive, or
valueNegative. The default is valueNotAvailable.
High Capacity Alarm
Startup Alarm
High capacity alarm startup alarm that may be sent.
Possible values are rising, falling, or rising-falling.
The default is rising-falling.
To Next Page
Loading...
