NetApp CN1610 - No Ipv6 Host; Ip Domain Retry; No Ip Domain Retry; Ip Domain Timeout;No Ip Domain Timeout

240 DNS Client Commands
no ipv6 host Use this command to remove the static host name-to-IPv6 address mapping in the
host cache.
ip domain retry Use this command to specify the number of times to retry sending Domain Name
System (DNS) queries. The parameter
number indicates the number of times to
retry sending a DNS query to the DNS server. This number ranges from 0 to 100.
no ip domain retry Use this command to return to the default.
ip domain timeout Use this command to specify the amount of time to wait for a response to a DNS
query. The parameter
seconds specifies the time, in seconds, to wait for a
response to a DNS query. The parameter
seconds ranges from 0 to 3600.
no ip domain
timeout
Use this command to return to the default setting.
Format
no ipv6 host name
Mode Global Config
Default 2
Format
ip domain retry number
Mode Global Config
Format
no ip domain retry number
Mode Global Config
Default 3
Format
ip domain timeout seconds
Mode Global Config
Format
no ip domain timeout seconds