NetApp CN1610 - Show Spanning-Tree Mst Detailed

340 Spanning Tree Protocol Commands
Port Mode...................................... Enabled
BPDU Guard Effect.............................. Disabled
Root Guard..................................... FALSE
Loop Guard..................................... FALSE
TCN Guard...................................... FALSE
BPDU Filter Mode............................... Disabled
BPDU Flood Mode................................ Disabled
Auto Edge...................................... TRUE
Port Up Time Since Counters Last Cleared....... 8 day 3 hr 42 min 5
sec
STP BPDUs Transmitted.......................... 0
STP BPDUs Received............................. 0
RSTP BPDUs Transmitted......................... 0
RSTP BPDUs Received............................ 0
MSTP BPDUs Transmitted......................... 0
MSTP BPDUs Received............................ 0
(CN1610) >
show spanning-tree
mst detailed
This command displays the detailed settings for an MST instance.
The following shows example CLI display output for the command.
(CN1610) >show spanning-tree mst detailed 0
MST Instance ID................................ 0
MST Bridge Priority............................ 32768
MST Bridge Identifier..........................
80:00:00:10:18:48:FC:07
Time Since Topology Change..................... 8 day 3 hr 47 min 7
sec
Topology Change Count.......................... 0
Topology Change in progress.................... FALSE
Format
show spanning-tree mst detailed mstid
Mode ◆ Privileged EXEC
◆ User EXEC
Parameter Description
mstid A multiple spanning tree instance identifier. The
value is 0–4094.