90 SNMP Commands
no snmp-server
community
This command removes this community name from the table. The
name
is the
community name to be deleted.
snmp-server
community-group
This command configures a community access string to permit access via the
SNMPv1 and SNMPv2c protocols.
Mode Global Config
Parameter Description
community-name A name associated with the switch and with a set of
SNMP managers that manage it with a specified
privileged level. The length of
community
-
name
can
be up to 16 case-sensitive characters.
ro | rw | su The access mode of the SNMP community, which
can be public (Read-Only/RO), private (Read-
Write/RW), or Super User (SU).
ip-address The associated community SNMP packet sending
address and is used along with the client IP mask
value to denote a range of IP addresses from which
SNMP clients may use that community to access the
device. A value of 0.0.0.0 allows access from any IP
address. Otherwise, this value is ANDed with the
mask to determine the range of allowed client IP
addresses.
view-name The name of the view to create or update.
Format
no snmp-server community
community-name
Mode Global Config
Format
snmp-server community-group community-string group-name
[ipaddress ipaddress]
Mode Global Config
To Next Page
Loading...
