NetApp CN1610 - Show Authentication Statistics

416 Port-Based Network Access Control Commands
The following example displays the authentication configuration.
(CN1610) #show authentication methods
Login Authentication Method Lists
---------------------------------
defaultList : local
networkList : local
Enable Authentication Method Lists
----------------------------------
enableList : enable none
enableNetList : enable deny
Line Login Method List Enable Method List
------- ----------------- ------------------
Console defaultList enableList
Telnet networkList enableList
SSH networkList enableList
DOT1X :
show
authentication
statistics
Use this command to display the authentication statistics for an interface.
The following information is displayed for each interface.
Method 3 The third method in the specified authentication
login list, if any.
Term Definition
Format
show authentication statistics slot/port
Mode Privileged EXEC
Term Definition
Port The port for which information is being displayed.
802.1X attempts The number of Dot1x authentication attempts for the
port.