NetApp CN1610 - Show Interface Ethernet Switchport

Chapter 4: Utility Commands 165
If you use the all keyword, the following information appears for all interfaces
on the switch.
show interface
ethernet switchport
This command displays the private VLAN mapping information for the switch
interfaces.
The command displays the following information.
Term Definition
Port The Interface ID.
Bytes Tx The total number of bytes transmitted by the
interface.
Bytes Rx The total number of bytes transmitted by the
interface.
Packets Tx The total number of packets transmitted by the
interface.
Packets Rx The total number of packets transmitted by the
interface.
Format
show interface ethernet interface-id switchport
Mode Privileged EXEC
Parameter Description
interface-id The slot/port of the switch.
Term Definition
Private-vlan host-
association
The VLAN association for the private-VLAN host
ports.
Private-vlan mapping The VLAN mapping for the private-VLAN
promiscuous ports.