NetApp CN1610 - Dot1 X Supplicant Timeout Held-Period; No Dot1 X Supplicant Timeout Held-Period; Dot1 X Supplicant Timeout Auth-Period; No Dot1 X Supplicant Timeout Auth-Period;Dot1 X Supplicant User

430 802.1X Supplicant Commands
dot1x supplicant
timeout held-period
This command configures the held period timer interval to wait for the next
authentication on previous authentication fail.
no dot1x supplicant
timeout held-period
This command sets the held-period value to the default value.
dot1x supplicant
timeout auth-period
This command configures the authentication period timer interval to wait for the
next EAP request challenge from the authenticator.
no dot1x supplicant
timeout auth-period
This command sets the auth-period value to the default value.
dot1x supplicant
user
Use this command to map the given user to the port.
Default 60 seconds
Format
dot1x supplicant timeout held-period <1-65535 seconds>
Mode Interface Config
Format
no dot1x supplicant timeout held-period
Mode Interface Config
Default 30 seconds
Format
dot1x supplicant timeout auth-period <1-65535 seconds>
Mode Interface Config
Format
no dot1x supplicant timeout auth-period
Mode Interface Config
Format
dot1x supplicant user
Mode Interface Config