NetApp CN1610 - Process Cpu Threshold

172 System Information and Statistics Commands
process cpu
threshold
Use this command to configure the CPU utilization thresholds. The Rising and
Falling thresholds are specified as a percentage of CPU resources. The utilization
monitoring time period can be configured from 5 seconds to 86400 seconds in
multiples of 5 seconds. The CPU utilization threshold configuration is saved
across a switch reboot. Configuring the falling utilization threshold is optional. If
the falling CPU utilization parameters are not configured, then they take the same
value as the rising CPU utilization parameters.
Term Definition
Dynamic Address
count
Number of MAC addresses in the forwarding
database that were automatically learned.
Static Address (User-
defined) count
Number of MAC addresses in the forwarding
database that were manually entered by a user.
Total MAC Addresses
in use
Number of MAC addresses currently in the
forwarding database.
Total MAC Addresses
available
Number of MAC addresses the forwarding database
can handle.
Format
process cpu threshold type total rising 1-100 interval
Mode Global Config
Parameter Description
rising threshold The percentage of CPU resources that, when
exceeded for the configured rising interval, triggers
a notification. The range is 1 to 100. The default is 0
(disabled).
rising interval The duration of the CPU rising threshold violation,
in seconds, that must be met to trigger a notification.
The range is 5 to 86400. The default is 0 (disabled).