NetApp CN1610 - Show Interface Counters

150 System Information and Statistics Commands
The description of the interface is configurable through the existing command
description <name> which has a maximum length of 64 characters that is
truncated to 28 characters in the output. The long form of the description can be
displayed using
show port description . The interfaces displayed by this
command are physical interfaces, LAG interfaces and VLAN routing interfaces.
show interface
counters
This command reports key summary statistics for all the ports
(physical/CPU/port-channel).
Format
show interfaces status [<slot/port>]
Mode Privileged EXEC
Field Description
Port The interface associated with the rest of the data in
the row.
Name The descriptive user-configured name for the
interface.
Link State Indicates whether the link is up or down.
Physical Mode The speed and duplex settings on the interface.
Physical Status Indicates the port speed and duplex mode for
physical interfaces. The physical status for LAGs is
not reported. When a port is down, the physical
status is unknown.
Media Type The media type of the interface.
Flow Control Status The 802.3x flow control status.
Flow Control The configured 802.3x flow control mode.
Format
show interface counters
Mode Privileged EXEC