500 Dynamic ARP Inspection Commands
no ip arp inspection
validate
Use this command to disable the additional validation checks on the received
ARP packets.
ip arp inspection
vlan logging
Use this command to enable logging of invalid ARP packets on a list of comma-
separated VLAN ranges.
no ip arp inspection
vlan logging
Use this command to disable logging of invalid ARP packets on a list of comma-
separated VLAN ranges.
ip arp inspection
trust
Use this command to configure an interface or range of interfaces as trusted for
Dynamic ARP Inspection.
Default
disabled
Format
ip arp inspection validate {[src-mac] [dst-mac] [ip]}
Mode Global Config
Format
no ip arp inspection validate {[src-mac] [dst-mac]
[ip]}
Mode Global Config
Default
enabled
Format
ip arp inspection vlan vlan-list logging
Mode Global Config
Format
no ip arp inspection vlan vlan-list logging
Mode Global Config
Default
enabled
Format
ip arp inspection trust
To Next Page
Loading...
