NetApp CN1610 - Show Users Long; Show Users Accounts

66 User Account Commands
show users long This command displays the complete usernames of the configured users on the
switch.
The following shows an example of the command.
(CN1610) #show users long
User Name
------------
admin
guest
test1111test1111test1111test1111
show users
accounts
This command displays the local user status with respect to user account lockout
and password aging.This command displays truncated user names. Use the
show
users long
command to display the complete usernames.
SNMPv3 Access
Mode
The SNMPv3 Access Mode. If the value is set to
ReadWrite, the SNMPv3 user is able to set and
retrieve parameters on the system. If the value is set
to
ReadOnly, the SNMPv3 user is only able to
retrieve parameter information. The SNMPv3 access
mode may be different than the CLI access mode.
SNMPv3
Authentication
The authentication protocol to be used for the
specified login user.
SNMPv3 Encryption The encryption protocol to be used for the specified
login user.
Term Definition
Format
show users long
Mode Privileged EXEC
Format
show users accounts [detail]
Mode Privileged EXEC