Chapter 4: Utility Commands 143
Dual Image Commands
FASTPATH software supports a dual image feature that allows the switch to have
two software images in the permanent storage. You can specify which image is
the active image to be loaded in subsequent reboots. This feature allows reduced
down-time when you upgrade or downgrade the software.
delete This command deletes the backup image file from the permanent storage or the
core dump file from the local file system.
boot system This command activates the specified image. It will be the active-image for
subsequent reboots and will be loaded by the boot loader. The current active-
image is marked as the backup-image for subsequent reboots. If the specified
image doesn't exist on the system, this command returns an error message.
show bootvar This command displays the version information and the activation status for the
current active and backup images. The command also displays any text
description associated with an image. This command displays the switch
activation status.
filedescr This command associates a given text description with an image. Any existing
description will be replaced.
Format
delete backup
delete core-dump-file
file-name
| all
Mode Privileged EXEC
Format
boot system
{active | backup}
Mode Privileged EXEC
Format
show bootvar
Mode Privileged EXEC
Format
filedescr {active | backup}
text-description
To Next Page
Loading...
