128 TACACS+ Commands
The following shows an example of the command.
(Switching)(Config)#tacacs-server host 1.1.1.1
(Switching)(Tacacs)#keystring
Enter tacacs key:********
Re-enter tacacs key:********
port Use the port command in TACACS Configuration mode to specify a server port
number. The server
port-number range is 0 - 65535.
priority (TACACS
Config)
Use the
priority command in TACACS Configuration mode to specify the
order in which servers are used, where 0 (zero) is the highest priority. The
priority parameter specifies the priority for servers. The highest priority is 0
(zero), and the range is 0 - 65535.
timeout Use the
timeout command in TACACS Configuration mode to specify the
timeout value in seconds. If no timeout value is specified, the global value is
used. The
timeout parameter has a range of 1-30 and is the timeout value in
seconds.
Default 49
Format
port
port-number
Mode TACACS Config
Default 0
Format
priority
priority
Mode TACACS Config
Format
timeout
timeout
Mode TACACS Config
To Next Page
Loading...
