NetApp CN1610 - Show Diffserv

Chapter 7: Quality of Service Commands 639
If you do not specify the Class Name, this command displays a list of all defined
DiffServ classes. The following fields are displayed:
show diffserv This command displays the DiffServ General Status Group information, which
includes the current administrative mode setting as well as the current and
maximum number of rows in each of the main DiffServ private MIB tables. This
command takes no options.
Term Definition
Class Name The name of this class. (Note that the order in which
classes are displayed is not necessarily the same
order in which they were created.)
Class Type A class type of all means every match criterion
defined for the class is evaluated simultaneously and
must all be true to indicate a class match.
Ref Class Name The name of an existing DiffServ class whose match
conditions are being referenced by the specified
class definition.
Format
show diffserv
Mode Privileged EXEC
Term Definition
DiffServ Admin mode The current value of the DiffServ administrative
mode.
Class Table Size
Current/Max
The current and maximum number of entries (rows)
in the Class Table.
Class Rule Table Size
Current/Max
The current and maximum number of entries (rows)
in the Class Rule Table.
Policy Table Size
Current/Max
The current and maximum number of entries (rows)
in the Policy Table.